CC60: Non-Mandrel Rotary Bender (Bend up to 2" Pipe)
CC60: Non-Mandrel Rotary Bender (Bend up to 2" Pipe)
Ready to place an order, or do you have any questions?
Call us at (704) 703-9400
Price: $18,775
Electrical Options:
220V / 3PH / 60Hz
480V / 3PH / 60Hz
The new generation of the Nargesa CC60 Non-Mandrel Rotary Bending Machines can bend up to 180º curves on hollow profiles ensuring the best bent finishes in today’s market. Equipped with a Touch Screen control grant the user interaction with the standard features offered using the latest 4.0 technology. The sleek look, versatility and faster bending speeds also allows us to have one of best machines offered in our industry. Materials can be round, oval, square, rectangular and made of different metals such as steel, aluminum, stainless steel, copper...
All Nargesa products are manufactured in our facilities in Spain. Hydraulic and electrical components are completely standard and from the the best leading European trademarks which have technical support all around the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...
THE CC60 FEATURES AND SPECIFICATIONS:
Dimensions: 40"L x 24"W x 45"H
Manufacturer's Warranty: 3 Years on All Parts (Fulfilled by Quantum Machinery Group.)
Nargesa 4.0 Technology
Stores up to 10,000 programs.
Side shelving to store tools.
Safety pedal to the right and left.
Quick Die Change Over: Maximum 60 Seconds.
Automatic and programmable spring back correction.
Dimensions can be programmed in inches or millimeters.
Two bending directions, right or left for easier bending.
Up to 50 different angles on the same piece can be programmed.
Pivot system with automatic unlocking to help remove material.
All bend dies are made of tempered steel for longer tool life.
CNC control with 7” touchscreen with more than 20 different languages.
Reinforcement tool post support arm for pipes with diameters over 1.5" (40mm) included.
The counter dies are made of bronze alloys to help prevent markings on the outside of the bent profiles.
THE CC60 TECHNICAL CHARACTERISTICS:
Max. Size on S275 Round Steel Pipe: 2" Schedule 40 or 2" Gas x 0.15" (4mm) or 2.375" O.D. (60.3mm O.D.)
Max. Size on Stainless Steel 304 / 316 Pipe: 2.375" O.D. x 0.160" Thick or 60.3mm O.D. x 3mm Thick
Max. Size on Square Tube: 1.50" x 1.50" x 0.160" Thick or 40mm x 40mm x 4mm Thick
Max. Size on Aluminum Pipe: 2.375" O.D. x 0.315" Thick or 60.3mm O.D. x 8mm Thick
Max. Radius of Curvature: 12.60" (320mm) > Repetition on the curve of +/- 0.1 Degrees
Min. Radius of Curvature: 3 Times the Tube / Pipe Diameter
Automatic Rotation Speeds: 0.7 up to 4.5 R.P.M.
Bending Direction: Left and Right
Robustness and Speed
The weight of the machine in comparison to other brands provides an idea of how it’s built. Some of our units are almost double in weight than our competitors. These are not DIY machines; they’re pipe benders that can work 24 hours a day. Made of robust materials, which are tempered in areas subject to wear, and activated with a helical-cut pinion planetary gear system. The rotation speed is also something to be taken into account. It can reach 4.5 RPM for more aggressive production; in many cases, more than twice as much when compared to similar machines in today’s market.
4.0 Technology
The advantages of having this technology in a machine are endless, so we’re only going to mention the most relevant. Whenever a customer agrees, the manufacturer may remotely connect to their machine to do any software updates completely free of cost and detect any anomalies in the machine without needing to travel to the machine site. Customers are notified when preventive maintenance must be done on the machine along with many other advantageous features.
Curve Thicknesses and Finishes
Most tube & pipe benders can only bend very thick-walled pipes with a 10% minimum thickness of the diameter of the pipe normally calculated. For example, a good curve on a 40 mm pipe is usually guaranteed with a 0.13" / 3.5mm or 0.15" / 4mm wall thickness. The original counter-shape designed by Nargesa guarantees a good finish even with a thin-walled pipe. The minimum thickness for a 1.5" / 40mm pipe can be 0.060" / 1.5mm or 0.080" / 2mm. This significantly lowers raw material cost.
Offset Head and Two-Directional Bending
The offset head design allows for complex curves as the pipe goes underneath the head. Bending pipe below the head is not possible with some pipe bender models. The all-new CC60 and CC90 benders can curve to the right and left without needing to rotate the die, meaning any piece can be bent regardless its complexity.
Enhanced Energy Efficiency
The CC60 elbow bender can be connected to 110 V or 220 V single phase voltage so it can be taken to a worksite, if necessary, and be connected to a simple outlet. The consumption per machine working stroke has been significantly reduced to save energy. Only 1.1 Kw with a working stroke of up to 2.37" / 60.3mm.
Automatic Unlocking
The bending carriage moves automatically to the right or to the left depending on the direction of the curve to more easily release the piece without needing to re-adjust the grip. This original system can complete pieces in much less time.
Reinforcement Tool Post Support Included
The CC60 CNC pipe bender comes standard with a reinforcement arm. It’s used to prevent machine chassis deformations. The Control indicates when this device is required or not required.
Bend 8 Lubricant (Included)
With the purchase of the CC60 CNC pipe bender, you’ll receive a 400 ml bottle of special bending lubricant: for a better finish on the outside of the curve, to prevent roughness and inner corrugation and reduce wear on the counter-shape die. Lubricates to reduce friction. Prevents and dissolves corrosion. Polishes and protects.
THE CC SERIES ESA S625 CONTROL PANEL
Nargesa tube and pipes benders are controlled with a very intuitive and easy-to-use 7” color touchscreen with the latest 4.0 technology. Just enter the pipe dimensions, thickness, angle of the curve or curves and choose a die from the library and the control programs the rest of the parameters automatically; elastic recovery correction (springback), recommended rotation speed, whether a tool post support is necessary or not, and if the intended curve is possible... All of this may be modified by the end user based on their own needs. These are some of the most relevant features of this control system.
4.0 Technology
Stores up to 10,000 programs.
On-screen alarm diagnostics.
Preventive maintenance warning.
Manual or automatic operation.
Piece counter.
1 RS232 serial port
1 CAN port with 9 D-Sub F connector contacts.
1 USB port
2 analog inputs, 12 bit resolution.
16 digital inputs (24 Vdc).
16 digital outputs (24 Vcc, 0.7 A max.) Protected against overloads and short circuits.
Up to 50 different angles on the same piece can be programmed.
Dimensions may be programmed in inches or millimeters.
Can be remotely connected by the manufacturer without having to travel to the machine site.
A library of available dies with the possibility of programming new ones.
Automatic or manual rotation speed adjustment from 0.7 to 4.5 rpm.
A library of differently shaped pipes with varying thicknesses.
Warning on screen if the tool post support needs to be used.
7” color touchscreen with 800 x 480 resolution
Independent correction of the programmable final curve degree.
Automatic elastic recovery correction (springback).
The CNC can be supplied in more than 20 different languages.